Remington 700 Police aka 700p

My first bolt action rifle was a Remington 700P and it was a birthday gift from my lovely wife.  However, greed got the best of me and I ended up flipping it to a buddy to raise funds for glass on another rifle.  When I finally got my finances sorted out (and my head sorted out), I wanted to buy it back from my buddy, but he ended up selling it to a friend of his in Alberta.  I was screwed.

I’d confessed to the missus and she never really forgave me for it.  I couldn’t really live with myself either so fast forward several years and I have the 700P back in my hands.  It’s been tweaked a bit by K&S in Edmonton with a threaded barrel and capped with a muzzle brake, and Leupold QRW 2 piece bases but other than that, it’s exactly as I remembered.  

I had a Millett Tactical 6-25x56mm LRS-1 illuminated scope laying around so I threw that on along with a Champion swivel bipod for the photos.  Contrary to my other bolt guns, I’m planning to leave this one alone with little or no modifications. 

I was originally planning to pick up a Savage 10TR 20” barrel for hunting, but the opportunity to get the 700P again came and I couldn’t pass it up.  The Millett is a pretty big piece of glass and I’d like to get something a bit smaller and lighter.  I used to have a Leupold Mark 4 8.5-25x50mm LR/T M5 illuminated with the TMR reticle, but I’m not sure I need that much magnification for what I plan to use this rifle for

The muzzle brake is a subtle design, and is similar in appearance to the integrated brake built into the .338 version of the 700P.  I doubt I will be replacing this unit, but we’ll see how it performs first.

I actually have another rifle with an M24 profile barrel and I’m fairly confident there is no way it would fit into this barrel channel.  

Remington guys, any idea which trigger this is?  It actually breaks quite nicely and has clearly been adjusted to have a pretty light pull, approximately 2 ¼ lbs.  According to Remington this is not the X-Mark Pro (XMP) model because it has the ribbed face, rather than the smooth face.:

https://www.remington.com/support/safety-center/remington-model-700-and-model-seven-notice

The pronounced palm swell

Anyway, some specs from the Factory:

·        Barrel: A Heavy parkerized 26" bull-barrel with a 1 in 12 twist

·        Stock: A H-S Precision stock reinforced with Du Pont Kevlar and fiberglass, textured matte black finish with two front sling swivel studs.

·        Bedding: Aluminum bedding block that runs up the entire length of the receiver

·        Chambered in:  .308 Winchester, .223 Remington, .243 Winchester, 7mm Remington Magnum, .300 Winchester Magnum, .300 Remington Ultra Magnum, and .338 Lapua Magnum.

·        Trigger: No clue……Remington experts chime in?  Is it the 40X, the X Mark, or none of the above?

The Model 700P – Police version is available in two versions, the standard 700P with the 26” barrel and 700P Light Tactical Rifle (LTR) with has a 20” fluted barrel with a slightly different HS Precision stock.  It’s difficult to tell with photos from Remington’s website:

http://www.remingtonle.com/rifles/700p.htm

http://www.remingtonle.com/rifles/700pltr.htm

According to Remington’s website, the stocks actually look exactly the same, but then again, their photo of a short action and long action also look exactly the same. 

My friend bought an LTR and it arrived the day after mine showed up in the mail and comparing the two side by side, you can clearly see the LRT’s stock is a bit shorter.  The circumference of the fore end on the LTR also smaller as is the palm swell.  I should probably take some of my own comparison pictures sometime to illustrate the point.  Overall, the LTR is lighter and probably less of a headache to hump around in the bush (especially with 6” less barrel) if you decide to hunt with it. 

As some of you may know, I am a huge fan of the chassis system for bolt guns, but there is definitely something attractive of a traditional rifle stock.  The 700P appears to have been influenced by the M24 Sniper Weapon System, but last I heard, those run about $5000-6000 USD if you can find one with complete deployment kits available to the following:

CATEGORY 1 – Active Duty Military Personnel w/ Sniper Qualification
CATEGORY 2 - Active Duty, National Guard, and Reserve Military Personnel 

http://www.canadiangunnutz.com/forum/showthread.php/1067441-Remington-M24s?p=9993204&viewfull=1#post9993204

That is a pretty awesome piece of history, but getting one of these just isn’t in the cards at the moment.  Another interesting tidbit for those of you who are thinking about using a 700P to build an M24 clone is the stock.  Though they are similar in appearance, the M24 uses the PST-024 HS Precision stock while the 700P uses the PST-011.  The main differences are the enlarged barrel channel to house the M24 barrel (No, it is not the same profile as the heavy varmint profile barrel on the 700P) and the inletting to allow for the Dakota/Sunny Hill bottom metal.

http://www.canadiangunnutz.com/forum/showthread.php/1067441-Remington-M24s?p=9997156&viewfull=1#post9997156

An article from Sniper Central says that these rifles are capable of shooting .5MOA out of the box, though .75MOA is more common.  When I first had my 700P, I didn’t know what I was doing (still don’t) so my first attempt to shoot groups was a dismal failure, even with match ammo.  I didn’t even shoot a proper 5 round group. 

Anyway, I sold the rifle before I had a chance to take her out a second time but I’ve learned a few things here and there since then and have had some pretty good luck with the 10TR so I’m curious how well this rifle shoots.  Looking forward to finding some time to take her out for a spin!

Mk18 Mod 0 or M4 with CQBR

But essentially there's no such thing as a "Mk 18 Mod 1".

The "Mk 18 Mod 0" was a complete weapon system issued in the Navy that came in either a 10.3" or 14.5" configuration.

The CQBR is just a 10.3" upper receiver meant to go atop a M4A1 lower (or in some cases, old M16s). Most of the "Mk 18s" you see aren't Mk 18s but just CQBRs from the original SOPMOD era. The current ones are just upgraded to be more in line with current SOPMOD accessories (Block II), so the DD rail, ATPIAL (LA-5), WMX-200, etc…

So, if you're looking for the uber nerdy technical correct term, it'd be something like "M4A1 with CQBR and SOPMOD Block II accessories".

But, if you're looking for what everyone knows them by, including those who carry them for a living, it's usually just "Mk 18".

http://www.m4carbine.net/showthread.php?165244-block-II-CQBR-or-MK18-mod1

Interesting read.

The CLAW for my C7A2

I must be out of my tree for doing this, but I picked up one of these "Claw" clones from hical.ca for my SA20.  We have these on our C7A2s at work, but I was never a big fan of them.  Some have experienced snagging on their tac vests, others love them.  My opinion of these is pretty neutral but lately I've had a bout of OCD and decided my SA20 needed one of these.

It's a pretty easy installation and all you really need is a punch set, a hammer and less than five minutes of work.

More OCD for the Mk18 Mod 0

So, I am one of the biggest Magpul fanboys.  I love most of Magpul products, their simplistic design, their functionality and their prices.  They work, and they're fairly inexpensive, what's not to like?  Some people hate on Mapul because it's the fashionable thing to do, but I'm not ashamed to admit I like Magpul.  But this Mk18 Mod 0 had me at a crossroads.  The trigger guard that came with my lower was a Magpul unit, not the factory Colt M4 standard issue AR trigger guard.  

I like the Magpul trigger guard.  It's asthetically pleasing, it's larger to allow ease of use for shooting with gloves on (something I rarely do, but it's nice to have that option), and really, there was nothing wrong with it.....other than the fact that they never came on the Mk18 Mod 0s.  Off it came, and I dug out a spare factory Colt unit to toss it on.  

Farely simplistic install if you have the right tools.  Basically all you need is a punch set and a hammer and less than ten minutes of your time.

AR Stands for Armalite Rifle, not Assault Rifle!

I love this ad, Armalite hits a home run with this one

PRI Gas Buster charging handle

One more piece of the puzzle arrived in the mail yesterday, apologies for the crappy cell phone pics, I got lazy :)

Interesting design, definitely a lot more real estate to grab on to compared to a factory charging handle.  Do I like it more than the simple Badger Ordinance Tac Latch?  Time will tell I guess as I've been using the Badger Ord unit for some time now.

Wilcox Aimpoint mount, replacement KAC RAS top rail, and fake KAC can for my Mk18 Mod 0 build

Though it is apparently more desireable to have the KAC RIS system for these Mk18 Mod 0 clone builds, mine was not serviceable and really needed replacing.  I searched for a RIS upper but could not find one so I threw on a RAS upper for now.  This unit came previously enjoyed and the owner decided to krylon the thing with a little tan paint.  I tossed it straight on for photos and see how it would look with my previously enjoyed LMT SOPMOD Gen Juan stock to see if it would match up.

As you can see the RIS on the left (black) is missing chunks of metal and it was only held on by friction.

Also came in was my Wilcox Aimpoint mount, more photos to come.

They don't call quad rails "cheesegraters" for nothing.  I chewed up my thumb a bit trying to get the thing on.

The Delta ring sits straight now compared to before:

Factory Aimpoint PRO mount compared to the Wilcox mount.  As I said before, I replaced the Aimpoint unit for no better reason than OCD.  The original mount in my opinion is superior to the Wilcox unit in that it worked fine, it had spacers for height if necessary and because the fastening knob had a build in torque setting that also facilitated removal.

The painted handguard is a bit beat up, similar to the stock, so it sort of matches, but everything in between is still shiny and new so I'm thinking I still may remove the paint with some brake fluid.

The fake CQD sling, still on the look out for the real thing.  One other thing I noticed a lot of clone builders were using was the tear-drop foward assist.  I'll have to do some more research on this and see if the original Mk18 Mod 0s had these, but it's not an expensive part and easily obtainable so let's see how far my OCD takes me.  I don't see it in this photo, so I might leave it out:

Anyway, some outdoor fun shots with the fake Airsoft corncob on it:

Obvious missing ingredients (at least to me) are the KAC M4QD flash suppressor and a real CQD sling plate.  After that, it's stuff that might not be super obvious:

• Colt 10.3in barrel and FSB
• Factory Colt trigger guard
• Comp M2
• Surefire M962
• PRI Gasbuster charging handle which is en route