Remington 870, short and long

It's been a while since I found a stock for my 12.5in Remington 870.  I liked the ergonomics of my other 870, I wanted to replicate that with my new shorty, but this time, I kept it a little less flashy with the black furniture.

Still not a big fan of the front blade sight, but at this point, I didn't have accuracy in mind anyway.  It's just a fun little boom-stick until I decide what to do with the sight.  The longer one however, shoots like a hot damn, and that red dot is amazing.  Target aquisition is faster, and when throwing slugs down range, they literally punch holes exactly where I want.  I have a feeling that ret dot is going to spoil me.

New Receiver, new Shorty

I've been itching to get optics on my Remington 870 for the longest time but this being the Express model, the receiver didn't have a rail on it, nor was it drilled and tapped to receive one.  In fact, it was just another plain black pump shot gun and the fanciest thing about it was the factory mag tube extension to make it a 6 + 1.  Of course, I threw on a side saddle and a butt stock sadle, and a really lame strap on flashlight which came off faster than it went on:

Anways, over time, my black shotgun ended up uber-cool FDE thanks to some Magpul furniture.  As much as people love to hate Magpul, it's inexpensive, it's durable, and it's comfortable.  I can't help it if it looks cool in the process.

Well, I finally decided to put a rail and red dot on it, and my options were:

1. Drill and tap the reciever for $80-120, depending on the place you go to, then buy the rail for another $10-20
2. Get a Mesa Tactical side saddle and rail combo for $140.  It's supposedly a solid unit, but it's not drilled into the receiver, so who knows.
3. Buy an 870 Tactical for $600.

I was browsing in the Equipment Exchange forum of Canadian Gut Nutz for options when another nutter was selling a drilled and tapped receiver for dirt cheap.  It was just the receiver and trigger group, no barrel, no furniture, but not much more than the Mesa side saddle/rail.  The cogs in my head immediately started turning and the next thing I know, I'm on Canadaammo.com ordering a 12.5 in barrel and more Magpul furniture.

The 12.5 in barrel from Can Am was inexpensive enough, it was even threaded for choke tubes, but it had a front blade sight on it that was so big, it could provide shade for a small child.

As you can see, the new barrel is substantially shorter.

So here are most of the parts laid out, one and a half shotguns.

This is the new/used Remington 870 receiver I picked up from EE (Equipment Exchange forum from CGN).  I bought a Millet rail from Lever Arms and installed it without any major issues.  One of the screws was a bit long and I had to file it down a bit to allow the barrel to go back in though.

Here is my original Remington 870 Express receiver from the shotty I bought from Reliable Gun many moons ago.  This would be the platform I would build my new shorty on.

Tac Star 6-shot side saddle installed.

Here are the beginnings of my new shorty.  I didn't have any fitment issues with mating the Canada Ammo/Dominion Arms 12.5in barrel to the Remington 870 receiver.  It was a perfect fit and easy to install.

Here's my new 870, built off the receiver I found on EE.

A lot of guys have the Aimpoint Micro, but since I'm not in that sort of tax bracket and don't depend my life on on my shotgun as a job, I settled for the Bushnell TRS-25 red dot.  I've read reviews that it holds up just fine to abuse from a shotgun, so I'm content with it for now and will run it until failure.

For now, my shorty will remain incomplete.  I still have to find a stock for it, but once I source one out, I'll take her to the range and throw some 3in magnum slugs down the pipe, just for good measure.

Magpul Shotgun

For Christmas this year, Santa Claus got me some new furniture for my Remington 870 Express a la Magpul.  I've had the shotgun for a few months now and this was the first time I've ever taken it down.  Usually I just run a bore snake through it, give the working parts a couple of shots of G96 and leave it at that.  I know some people who never clean their shotties out of principle.

I got the SGA stock and the fore end in Flat Dark Earth, and I also got the sling plate as well.

Talk about some quality parts.  I took my 870 apart with relative ease and the Magpul parts installed with such precision, you'd think they were hand-crafted.  There was no modding, no smithing, no grinding or cutting.  The old furniture came off, the Magpul stuff just slipped on.

I'm pretty happy with the feel of the new furniture, but let's see how it works out at the range.